If this message is not displaying properly, click here to launch your browser.

Precise Readings with Fuel and Water Level Senders

Fuel & Water Level senders provide an accurate, continuous readout of fuel or water levels even in a moving boat. Consisting of a single in-tank probe and an amplifier, its innovative technology renders the traditional float arm assembly obsolete.

The fuel sender itself is constructed of concentric tubing (a small brass or aluminum tube inside a larger aluminum tube) that's placed vertically in the tank. Acting as a capacitor, the inner tube reads how much air is in the tube and changes in value as the fuel level rises or falls. The amplifier converts these values to a signal suitable to drive a standard gauge or other display. The capacitor can even detect water in the fuel tank. The sender is easily installed in the standard float arm assembly mounting plate, an SAE standard 5 bolt pattern.

The water sender is constructed of a PVC tube with a stainless steel wire along the outside and an insulated wire through its center. The readings on your gauge change as the water level rises and falls on the sensor wire.

The biggest advantage:

  • The absence of moving parts = resistance to mechanical failure
  • Greatly reduces needle bounce on the gauge, as reading is unaffected by side to side or forward motion.
  • Easily installs into the standard float arm assembly mounting plate.
  • Available for standard as well as custom tank installations

These senders can be built to fit tanks from 4" to 120" deep, with your choice of 12 or 24 volts. Available in 12 inch increments and can be cut into any length down to the next lower increment. A 3 terminal sender is offered for Smartcraft™ applications.

No Surprises with Redline gauges!

The Redline gauge series match your Waterproof gauges with an additional L.E.D. light to warn of specific temperature, pressure or level concerns based on built-in set points. Whether you're boating from dawn to dusk, these L.E.D. lights are visible even in direct sunlight.

Select from: fuel level, oil temp, water temp, fuel pressure or oil pressure, all have a 2 1/16" cut out. For more information please visit http://www.livorsi.com/catalog/redline.htm

News

Closeout Items
**Additional 20% off buying level**

















To request a new catalog,
click here
Request a Livorsi Marine, Inc. catalog

www.livorsi.com
715 Center St.                        Grayslake, IL 60030                        P: 877-548-5900                        F: 847-752-2415

Livorsi and the Livorsi logo are either registered trademarks or trademarks of Livorsi Marine, Inc. in the United States and / or other countries.

® 2007 Livorsi Marine, Inc. All rights reserved.

PLEASE DO NOT REPLY TO THIS MESSAGE. To obtain information on how to contact Livorsi, visit us on the web at: http://www.livorsi.com, or call 877-548-5900. This is an advertising message from Livorsi Marine, Inc. If you would prefer not to receive e-mail like this from Livorsi Marine in the future, please click here to unsubscribe or send an e-mail to livorsi_marine-unsubscribe@lists.compx.com. Alternatively, you may mail your unsubscribe request to Livorsi Marine at the following address:

UNSUBSCRIBE
Livorsi Marine
715 Center St.
Grayslake, IL 60030